For all customers who want to buy the VAG CAN +K COMMANDER Software must pay attention to this, that the original software version for the moment is 6.0 but not 8.0 or 9.0, these are fake chinese software copies of our original software and they do not work.
!!! NEW NEW NEW NEW NEW !!!
No more need of precoded transponders for SEAT, Volkswagen, Skoda and AUDI cars from 2006 year up. Now with the help of our VAG K + CAN Commander software, you will be able to program every TP22, TP23, TP24 and TP25 transponder until 2008 year! On AUDI A4 2005 year up, you can program any ID48 Megamos Crypto transponder with our VAG K + CAN Commander Software and the new integrated TANGO Programmer !
!!! NEW NEW NEW NEW NEW !!!
EDC17/MED17 reading security access/component protection/mileage
Must be ordered as a new software module - AN014 |
 
More info>>>
VAG-CAN COMMANDER Software is developed to work with the new and old models of Volkswagen, AUDI, SEAT, SKODA and Porsche Cayenne cars equipped with K-Line and CAN communication System from 1995 year to nowadays. With this software you can read the security pin code, change the mileages and kms on all these models, program new keys and do complete diagnostic. The software works with the special CAN interface which are sold as package.
Functions of the VAG COMMANDER Software:
Latest news:
- New! New! New! BY OBDII - EDC17/MED17 reading security access/component protection/mileage. New! New! New!
- New! New! New! ECU Siemens SIMOS PPD - by OBDII reading security access code/component protection.
- MED9 crypted EEPROM - by OBDII reading security access code/component protection
- Skoda Superb 93C86 crypto - Read/Write EEPROM of instrument cluster by OBDII. Mileage correction/PIN.
- Tool for preparation transponders like ordered from dealer so for VW Passat 6,... can be used usual TP23
- Possibility for skiping component protectin while programming keys in VW/Seat/Skoda
- EDC16 - Immo bypass function by OBDII
- New! New! New! BY OBDII - EDC16 BYPASS OF THE IMMOBILIZER SYSTEM! New! New! New!
Features:
- Full diagnistic activities CAN TP2.0, CAN TP1.6, KW1281, KW2000
- Autoscan of all units using CAN TP2.0, CAN TP1.6, KW1281 and KW2000
- Covers all electronic control units in the vehicles (CAN-TP2.0).
- Manual definition of running diagnostic session.
- Broadcast diagnostic request – disable normal communication, clear DTCs, Logistic (transport) mode,.....
- Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Supported is also adaptation of a KESSY unit to the vehicle (K/CAN/Porsche-CAN)
- Most of popular diagnostic requests – identifications, coding, adaptations, DTCs, measured values, basic setting, and s.o. Functions are under CAN-TP2.0.
- Special function - odometer correction in instrument clusters and EDC15x by OBDII.
- Special function - READING EDC16x EEPROM by OBDII
- Special function - Reading/Writing odometer in EDC16x by OBDII
- Special function - Reading Security Access Code/Login WFS from EDC16x by OBDII
- Special function - Reading Security Access Code/Login WFS from MED 9.x by OBDII
- Special function - read Security Access Code/Login WFS.
- Special function - read/program immobilizer data stored in the immobilizer.
- Special function - programming immobilizer data stored in the EEPROM of EDC16 and MED9x by OBDII.
- Special function - programming reflashing counters stored in the EEPROM of EDC16 by OBDII. Now supported EDC16CP34 VW Touareg!
- Special function - read/write EEPROM from instrument cluster/immobilizer. Now is covered also Audi A4 BOSCH RB8 Crypto cluster, VW Touareg 2007/2008 CAN, VW Phaeton 2008 CAN, Porsche Cayenne 2008 CAN, Bentley Continental 2008 CAN !
- Special function - VAG MMI TV Activation - now covers year 2007.
- Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
- Special function - Key learning. Can be programmed key to Audi A8, Audi A3, Skoda Octavia II (2007+), VW Touareg 2007/2008, VW Phaeton 2008, Bentley Continental 2008, Porsche Cayenne 2008 independed from component security protection! Allowed is direct connection with HITAG-2 programmer.
- Special function - Airbag units - Read/Write EEPROM by diagnostic! Clearing crash data! All VW/Audi/Seat/Skoda-Bosch/Siemens airbag modules up to year 2005
- Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
- Special function - Read / Write flash memories EDC16x, EDC15x, ME7x, MED9x, PPD1.x (EDC16 - checksum calculations while programming
- Special function - Read / Write of reflashing counters stored in the EEPROM of EDC16 by OBDII (now not possible to be detected that your engine control unit is reflashed! ADDITIONALY NOW YOU CAN SET FLASHTOOL NUMBER TO ANY VALUE!
- Special function - Calculators by dump of EEPROM - KESSY - security code, SIMOS PPD1.4/1.5 security code, Skoda Fabia, Skoda Roomster, VW Polo, Seat Ibiza 93C86 CRYPTO; EDC16 odometer correction/checksums; GATEWAY 95160 - odometer correction; MED9x checksums; ....
- Special function - programming dashboards from VW/SEAT/SKODA (CAN) and AUDI A3 (CAN) in VIRGIN status - FREE FOR ALL OWNERS OF "IMMO PANNEL".
- Special function - programming dashboards from VW/SEAT/SKODA/AUDI (K) 93C86 and AUDI A4 RB4 BOSCH in VIRGIN status - so will not need anymore from PIN code for the adaptaton - FREE FOR ALL OWNERS OF "K update instrument cluster".
Models covered>>>
Download User manual
Models covered for extracting security pin codes>>>
Models covered for Odometer correction>>>
ATTENTION: Starting from V5.0 all updates from previous versions are caried through the "VAG K+CAN Update Request" tool. It is available in the V4.1 package or is available for download here .
Just put the dongle and the interface and start the tool.
Then enter your name, e-mail, interface number and press the "request" button.
A file will be generated in the folder where the tool is placed. Please send the file to our e-mail or accept the question for automatic sending.
You can choose one of the packages we offer here or you can build your own package from the updates bellow:
In order to make your configuration of the VAG K+CAN COMMANDER, first you must always purchase the BASE VERSION INTERFACE in every package you want to order.
  
FULL PACKAGE: 5500 EUR Buy now 5500 EUR
BASE VERSION INTERFACE - AN001 - BASE: 300 EUR Buy now 300 EUR
Updates to the basic package:
AN002 - Odometer by CAN - 250 EUR
- Odometer correct CAN based cars Buy now 250 EUR
AN014 - EDC17 odometer/PIN reading by OBDII - 1000 EUR
- EDC17/MED17 reading security access/component protection/mileage
Buy now 1000 EUR
AN012 - A - EDC16x/MED9.x-odometer by OBDII- 500 EUR
- EDC16/MED9x - Read odometer/Change odometer
Buy now 500 EUR
AN012 - B - EDC16/MED9/SIMOS PPD -odometer/PIN EEPROM / ImmoBypass - 1000 EUR
- EDC16/MED9x - EDC16/MED9x - Read EEPROM/ Read odometer/Change odometer/ Securiy
Access Code - supported ECUs with crypto EEPROM / EDC16 IMMOBYPASS function
Siemens SIMOS PPD - reading security access code PIN, component protection
Buy now 1000 EUR
AN003 - PIN by CAN- 500 EUR
- Security code reading (CAN) / Read/Write EEPROM memory of instrument clusters/immobilizers
Buy now 500 EUR
AN004 - IMMO data immobilizer - 250 EUR
- Pannel for programming IMMO data (PIN code/VIN and s.o. in immobilizer), availability to reset instrument cluster/immobilizers from VW/SEAT/SKODA-CAN and Audi A3-CAN to VIRGIN state
Buy now 250 EUR
AN005 - IMMO data ECU, Pannel for programming IMMO data (PIN code/VIN and s.o. in EDC16)*- 250 EUR
-data is stored inside of EEPROM memory of ECU - EDC16x
-data is stored inside of EEPROM memory of ECU - MED9x
*Note: options for programming of immo data must be with the option "security code reading (CAN)"
Buy now 250 EUR
AN006 - Odometer/PIN by K-line - 300 EUR
- K-line UPDATE - Odometer correct / Security code reading / Read/Write EEPROM of instrument cluster/immobilizer
Buy now 300 EUR
AN007 - Read/Write EEPROM ECU - 250 EUR
- Read/Write EEPROM of Engine Control Units Buy now 250 EUR
AN008 - Read/Write flash/counters ECU - 500 EUR
- EDC17/MED17 - Read FLASH by OBDII
- EDC16x Read/Write counters for flashing stored in the EEPROM ST95320 by OBDII
- EDC16 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of
checksums while programming.
- BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8,
MED9x - FSI, EDC16x - Read flashmemory by OBDII
- EDC15x Read/Write flash memory
Buy now 500 EUR
AN009 - Key learning - 1000 EUR
- Key learning function
Buy now 1000 EUR
Buy now 100 EUR
AN011 - TV Activation - 200 EUR
- VAG MMI TV Activation - A6,A8,Q7 now covers 2007!
Buy now 200 EUR
AN013 - HITAG2 Programmer - 350 EUR
- HITAG-2 transponder/key programmer
Buy now 350 EUR |
