HOW TO PAY & ORDER



PayPal: edilock@yahoo.com


For USA:
tel: (702) 241 5638
E-mail: vaginfousa@yahoo.com


For TURKEY:

KADIKOY Anahtar
tel: 0090/216 4145254
0090/ 216 4145255
e-mail: iboates@hotmail.com
Web: www.kadikoyanahtar.com.tr

Motorola/Freescale MC912-9S12-9S12(Xgate) in-circuit Programmer
As you all new the comapany ROSFAR Technologies is now closed forever! The products R260, R250 and R200 can be supplied by our company and they work 100 % like the original ones! The products come with 6 mothns warranty!



List of all car models covered for in-circuit programming by the programmer

• BMW 1,3,5,6 Series CAS2 White (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black ( 9S12X )
• BMW 7 Series CAS 2002 (HC12)
• BMW 7 Series CAS 2005 facelift (9S12)
• BMW X3/X5 EWS4 (9S12) incl. 2007 version !!!New!!! (editing of EWS4's 9S12D64 now works)
• Ford Mustang 2007 (9S12) !!!New!!!
• Landrover Freelander 2002 (HC12)
• Landrover Freelander 2004 (HC12)
• Mercedes A-Class 2004 Key Module (9S12)
• Mercedes C/CLK C209 ZGW (9S12) **
• Mercedes E/C W211 Key Module (HC12) **
• Mercedes E/C/CLK/SLK W211 Key Module (9S12) **
• Mercedes ML/R W164 Key Module (9S12) **
• Mercedes S/SL EZS R230 (9S12) **
• Mercedes Sprinter 2007 EZS (9S12) !!!New!!!
• Mini One/Cooper Dashboard (HC12)
• Mini One/Cooper Dashboard NAVI (HC12)
• Mini One/Cooper EWS4 (9S12)
• Mini One/Cooper CAS3 Black ( 9S12X )
• Volkswagen Crafter 2007 EZS (9S12) !!!New!!!

** - NOT for new NEC based modules (Amazonas, Havanna, Palermo, Spanien).




Manual and Instructions manual R260 software V9.6

 

     R260S Programmer can program the Motorola/Freescale 68HC912/MC912/MC9S12
microcontroller families, including the latest MC9S12X XGATE-based processor family. The ystem works as a in-circuit programmer, no needs to remove the chip from the target board nor lifting any pin. It connects to the board via serial connection by using only few wires and it works with secured chips, too. No matter if it is secured or not!
IMPORTANT!!! This interface can program any board that uses a HC12 , 9S12 or 9S12X series Motorola/Freescale secured and nonsecured microcontroller

 !!!!!!!THIS IS THE ORIGINAL and MOST RELIABLE ONE!!!!!!!!
    Be aware that some competitors are providing copies of this tool without the automatic learning algorithm making them really unsafe. Use them at your own risk!

Price: 1500 EUR

Buy now 1500 EUR

 

 

Hi Tag 2 Programmer and key generating tool V 6.7



* Programming of remote control for the latest BMW vehicles with smart key  with PCF7945C05 transponder (for this function you have to send the hardware for upgrade, it is paid upgrade!)
    
* Added new versions of Kessy modules 2008/2009 year - Audi A8/VW Touareg/VW Phaeton/Porsche Cayenne/Bentley Continental
    * Display key status from dump - sec.access, frequency, used keys
    * Added function to read the 7th byte CS from the existing key

New software for generating transponders and keys for LAND ROVER and RANGE ROVER(Sport) ready to start the vehicle is now developed and ready for sale for our Hi Tag 2 Programmer.
* Programming of KeylessGo keys
      * Added new versions of Kessy modules
* Preparing precoded transponders for the new Renault CLIO III and MODUS






PCF7936/7942/7944/7946 - password and cipher mode programmer. The Programmer can read and copy transponders known as Hi Tag 2, intergrated in the new car models after 2003 year, all these transponders are in the keys of new vehicles like BMW, VW, Audi, Porsche, OPEL, SAAB, Puegeot, Citroen, Mitsubishi and so on . The programmer can work in password and cipher mode.

 

NEW NEW NEW NEW NEW NEW

    The new fuction added to the The High Tag 2 programmer is the key programming for new series for BMW cars like 1(E87), 3(E90/E91/E93), 5(E60/E61), 6(E63/E64), 7(E65/E66), Z4(E85/E86), new X5(E70) and programming transponders for EWS 2, 3/3+ and 4. The programmer works with original keys as well as with High Tag 2 chips produced from Philips company. Now you can read/write data stored inside of the key like Identification number and mileages/km! In order to program a key or transponder, first you must read the memory/eprom/dump of the processor in the immobilizer(EWS, CAS or KESSY module) of the car and then you load it to the programmer and program the new key, after that you save the new file and write it back to the processor. To be able to use this new function, you will have to buy our special programmer for processors MC68HC912 and 9S12 for CAS modules.

  Another new function of the Hi Tag 2 Programmer is generating transponder key to start the vehicle from dump for NEW AUDI A8, VW Touareg, VW Phaeton, Porsche Cayenne and Bentley Continental and prepairingan original transponder for programming with diagnostic equipment.(this function is available only if you buy the full package)

                                                       
                                                     Full package price:
1000 EUR

                                                     
                                                Buy now 1000 EUR

OMEGA-ORANGE Programmer

This is the original OMEGA-ORANGE Programmer which is specially developed for work with vehicle Immobilizers, KM/Mileages changing from eeprom dump and Airbag reseting from dump. With OMEGA Programmer you can also read most types of microprocessors, eeprom and flash memories.


Prices:


Immobilizer package - 500 EUR                   Buy now 500 EUR

KM/Mileage change package - 850 EUR      Buy now 850 EUR

OMEGA Airbag resetting package - 850 EUR       Buy now 850 EUR
  ALFA ROMEO
  AUDI
  CITROEN
  CHEVROLET
  FIAT
  FORD
  LANCIA
  LAND ROVER
  MG
  OPEL
  PEUGEOT
  RENAULT
  ROVER
  SEAT
  SKODA
  VOLKSWAGEN
  home
WebDesign: ViperStudio.NET