20.12.2008 - !!! NEW !!! !!! NEW !!! !!! NEW !!! Now for sale TA2/TA3/TA4/TA5 transponders which you can use to produce dealer keys:
* Programming dealer keys included into new function - AN016.
* Ediock Ltd supply own transponders TA2/TA3/TA4/TA5 (based on Megamos 48 Crypt). This transponders can be used to produce dealer keys for almost all models of VAG. Required package is AN009 + AN016 + Tango programmer.
* Possibility to produce TP22/TP23/TP24/TP25 transpodners from our TA2/TA3/TA4/TA5 transponder using the VAG Commander.
* TP22/TP23/TP24/TP25 transponders available at very low price.
* TA2 transponders are used to produce dealer keys for Seat.
* TA3 transponders are used to produce dealer keys for VW.
* TA4 transponders are used to produce dealer keys for Skoda.
* TA5 transponders are used to produce dealer keys for Audi A3 and A4.
* Decoding of the Passat B6 comfort module in order to get all 7 bytes of the component protection data. Price of TA2/TA3/TA4/TA5 is 14 EUR each transponder.
02.12.2008 - !!! NEW !!! !!! NEW !!! !!! NEW !!! VAG K+CAN Commander 6.2 - VW/SEAT/SKODA/AUDI A3,A4 preparation dealer keys/transponders
* Only using VAG Commander together with TANGO you can prepare transponders or keys like ordered from dealer, so no more necessery to be ordered keys from VAG dealers.
* VW Passat 6 - Comfort System/Immobilizer decryptor introduced
* Extended covered EDC17 engine control units - reading PIN code/CS by OBDII
* Extended covered MED9 engine control units - USA market - reading PIN code/CS by OBDII
* Now you can read PIN code/CS/Change odometer in the latest generation EDC16 (2008) engine control units by OBDII
* Support of new software versions Skoda Roomster, Skoda Fabia, VW Polo, Seat Ibiza
* Improoved key learning procedures so now is easy programming keys of VW Passat 6 (2005+), VW Audi A3, VW Audi A4
All softwares 6.2 will be available on our server until 12-December-2008
02.12.2008 - !!! NEW !!! !!! NEW !!! !!! NEW !!! New functions to our Commander softwares:
* Abrites Commander for Mercedes 1.0 - Read/Write eeprom of EAM/AAM, TV activation, Seatbelt deactivation, airbag crashdata clear,W163 key programmin and all by OBDII
* Abrites Commander for Fiat/Lacia/Alfa 1.1 - odometer correction in engine control unit by OBDII - read/write eeprom by OBDII
* Abrites Commander for PSA 1.0 - read/write eeprom of EDC15 by OBDII (PIN reading)
* Abrites Commander for OPEL 1.3 - extended covered models for PIN reading Astra H, keyprogramming functions
02.12.2008 - !!! NEW !!! !!! NEW !!! !!! NEW !!! Now with the help of the TANGO Programmer and the VGA K + CAN Programmer, you can precode and program a new TP22, TP23, TP24 and TP25 transponder to any VAG Group Cars from 2004 to 2008 which are equipped with CAN System. It will be sold as a separate update! Just a reminder that TP22 is for SEAT, TP23 is for VW, TP24 is for SKODA and TP25 is for AUDI!
02.12.2008 - !!! NEW !!! !!! NEW !!! !!! NEW !!! Mercedes Commander Software and Peugeot Commander Software are released and ready for sale. Possibility to read the immo pin code of the PSA Group Cars equipped with diesel ECU - EDC15. Also, with the help of the TANGO Programmer connected to the Laptop and the car, you can program transponder ready to start the car for ML and A KLASS!
21.11.2008 - !!! NEW !!! !!! NEW !!! !!! NEW !!! Software for generating transponders and keys for LAND ROVER and RANGE ROVER(Sport) ready to start the vehicle is now developed and ready for sale for our Hi Tag 2 Programmer.
15.11.2008 - !!! NEW !!! !!! NEW !!! !!! NEW !!! Now on AUDI A4 2005 year up, you can program any ID48 Megamos Crypto transponder with the help of our VAG K + CAN Commander!
11.11.2008 - For all our current and future customers who like to see our products alive, you can come and visit the stand of our distributor in TURKEY Kadikoy ANAHTAR at the Turkish Locksmiths Federeation Exhibition in Istanbul from 21.11 to 23.11.2008 at The Barcelo Hotel.
11.11.2008 - !!! NEW !!! Software for resetting AIBAG modules from dump/eeprom is released for sale!
10.11.2008 - !!! NEW !!! New Commander Softwares like Commander Software for Fiat/Lancia/Alfa 1.0 and Commander Software for Toyota/Lexus/Scion are released and ready for sale. To be expected for release are Commander Softwares for Mercedes Benz cars and Peugeot/Citroen cars.
21.10.2008 - !!! NEW !!! RENAULT K + CAN Commander Software and Device is released and ready for sale. No more need for pin codes when you want to program keys or smart card with ID46 transponder.
21.10.2008 - !!! NEW !!! No more need for precoded transponders for SEAT, Volkswagen and Skoda cars. Now with the help of our VAG K + CAN Commander software, you will be able to program every TP22, TP23 and TP24 transponder until 2008 year !
08.10.2008 - !!! NEW !!! The new RENAULT Commander Software is under developing and will be released soon. The software will program and erase keys on the Renault cars with ID46 transponder.
26.09.2008 - !!! NEW !!! VAG K+CAN Commander 6.0 - EDC17 / SIMOS PPD by OBDII
* Reading EDC17/MED17 security access/component protection/meleage/flash
* ECU Siemens SIMOS PPD - by OBDII reading security access code/component protection
* EDC16 - by OBDII reading EEPROM - update with latest ECUs MY2008
* MED9 crypted EEPROM - by OBDII reading security access code/component protection
* BOSCH RB8 instrument cluster Audi A4 - updated. Now covered by OBDII are US/Japanese.
* Skoda Superb 93C86 crypto - Read/Write EEPROM of instrument cluster by OBDII. Mileage correction/PIN.
* Skoda Roomster - updated dabase with instrument clusters
* Tool for preparation transponders like ordered from dealer so for VW Passat 6,... can be used usual TP23
* Possibility for skiping component protectin while programming keys in VW/Seat/Skoda
* Updated dabase from SW versions of KESSY units MY2008
* UDS protocol - improvements
26.09.2008 - !!! NEW !!! BMW Commander 3.0 - free version for all customers who already have the BMW Commander
* now covered old body platform E3x,E46,E53.. - mileage correction, EEPROM R/W,
26.09.2008 - !!! NEW !!! Released Edilock Commander Software for Toyota/Lexus 1.0
* diagnostic activities, programming keys (smart keys)
26.09.2008 - !!! NEW !!! Released Abrites Commander for Mercedes 1.0
* diagnostic activities, programming keys, mileage correction
26.09.2008 - !!! NEW !!! Released HI TAG 2 Key tool programmer v5.0
* Remote control programing improved. Updated database KESSY units.
26.09.2008 - !!! NEW !!! Software updated for the devices - VAG LCD PIN Code reader, VAG K+CAN, VAG Bypass, Toyota/Lexus key programming device - free for all owners
18.09.2008 - The new electronic opening device for VAG Group cars will be shown at the Security Messe Essen in Gremany from 07.10 to 10.10.2008 at Hall 6, stand 625. The device is for opening and deactivating the original factory alarm of the car.
20.08.2008 - For all our current and future customers who like to see us and our products alive, you can come and visit our stand at the Security Messe Essen in Gremany from 07.10 to 10.10.2008 at Hall 6, stand 625.
06.07.2008 - New functions for VAG K + CAN Commander in V5.3:
- !!!NEW!!! BY OBDII - EDC16 BYPASS OF THE IMMOBILIZER SYSTEM!
- Possibility for odometer correction of latest VW/SEAT/SKODA produced after 09/2006 up to now!!! Tiguan, EOS, Scout, .... no more problematic vehicles for our customers.
- By OBDII - odometer correction R/W eeprom of instrument clusters, PIN code reading from Skoda Fabia 2007+, VW Polo VDO 2007+, Seat Ibiza VDA 2007+, Skoda Roomster - all crypted. New version of Instrument cluster from VW T5/Multivan 2008 added.
- Added support for reading PIN code by OBDII from immobilizer boxes - VW Golf3, VW Polo, VW GOL ...
- UDS diagnostic protocol used in the latest vehicles from VAG is now implemented in VAG Commander.
03.07.2008 - New update released for VAG K + CAN Commander V5.3
24.06.2008 - New update will be released for the VAG K + CAN Commander for reading immo pin codes on VAG Grpoup car on system 1 from 1996 to 2000 year with Black Siemens Immo boxes.
23.06.2008 - The new Commander Software for OPEL/VAUXHALL Cars is finished and will be ready for sale after 15.07.2008.
23.06.2008 - Toyota & Lexus device is upgraded to work with the latest immobilizer system integrated in the Toyota & Lexus car models known as SMART KEY system (keyless go system).
22.06.2008 - Released new VAG key programmer and Immobilizer bypass
of petrol and diesel(EDC 15) via OBD II - 1996-2006. The old Device is now updated to cover many new models which work under K-line till 2007 year like VW T5 2007, VW Roomster, VW Fabia, Audi A4 ...
22.06.2008 - Released new VAG K+CAN Bypass device - now you can perform via OBDII key programming and emergency start of the . Covers vehicles up to 2008.
10.06.2008 - New bugs fixed (version 5.1):
* Reading security code from A4 RB4/RB8 Crypto instruments
* Changing odometer more precisly in A4 RB4/RB8 Crypto instruments
* Changing component security bytes in A4 RB8 insrument.
* Learning keys for RB8 instrument.
* Added description of the possible engine control units (ECUs) for the given model/engine
* Type recognition for EDC16 ECUs
* Integration with the HiTag2 programmer which allows to program the key transponders directly from the VAG K+CAN Commander
* Bug-fix reading MED9x security access code
* Bug-fix no connection with some device through K-Line (especially on slow computers)
* Bug-fix Audi A4 -1996, Audi A6 -1997 (baud 3800), Motometer instruments
26.05.2008 - New! New! New! New! - New software for reading the immobilizer pin code on all CAN BUS System based OPEL/Vauxhall cars from 2003 to 2008 including, will be developed and released in a short period of time. The software will read the pin code of the following models - Vectra C, Astra H, Corsa D, Tigra B, Zafira B, Signum and etc.
29.04.2008 - "Mercedes BENZ Infra Red key programmer 1998-2006" - this new device can program new and used Infra red plastic keys and repair the nonworking keys which stop operating after some years of using them!
27.04.2008 - "Universal display device" - reading and showing the immobilizer pin code of all VAG Group cars from 1996 to 2008!!! The Device will be shown at the MLA Expo 2008 in Telford, UK
01.04.2008 - For all customers who want to see our products, you can visit us at the MLA Expo 08 in Telford, United Kingdom, stand 342 from 30th May to 1st of June 2008.
18.03.2008 - New and bug fixes (version 5.0):
* By OBDII - Read EEPROM of EDC16U1, EDC16U31, EDC16U34, EDC16CP, EDC16CP34
* By OBDII - Read security access code/Login WFS stored in EDC16U1, EDC16U31, EDC16U34, EDC16CP, EDC16CP34
* By OBDII - Read security access code/Login WFS stored in MED 9.5.10 and MED 9.1
* By OBDII - Read/Write odometer stored in EDC16U1, EDC16U31, EDC16U34, EDC16CP, EDC16CP34
* Support for all DTCs according ISO 15031-6
* Possibility to scan all units in the car using CAN TP2.0, CAN TP1.6, KW1281 and KW2000 and displaying the numbers of DTCs stored in each device
* Generally changed user interface
* Now VAS Numbers used to connect to the devices
* Configuration of used diagnostic protocols, bus-timings, etc.
06.03.2008 - EDC 16 read/write eeprom, reading immo pin code, read/change VIN number, Immo bypass function and restore of the immo function for all VAG Group car with CAN system will be released for sale on 15.03.2008. All customers who has bought the VGA K+ CAN Commander will be able to buy this update as a separate software module.
06.03.2008 - New function for Immo bypass of EDC16 for all VAG Group cars with CAN system will be added to the VAG CAN System device. The new VAG CAN System device will be released for sale from 06.05.2008. We will not exchange the old devices for new ones. Everybody who wants to have the new device, will have to pay the price of the new device.
06.03.2008 - Soon we'll realease a new electronic device for opening VAG Group cars from 2004 up.
