|
|
| Mercedes BENZ key programming device & software |
 |
New Mercedes ML device |
 |
. 
More info>>>
|
The new Mercedes Benz Key Programming Device and Software for the models ML from 1998 to 2005 with the metal key(not the plastic electronic key) can now program all 8 keys in the Immobilizer. The Device program/add new keys without erasing the existing keys. You can program/add up to 8 new keys. The programming is done via the diagnostic plug OBD II. For programming you must use our special transponder, specially made for the key programming and to choose on which position you want to program the new key or keys with the help of the DIP switches built into the device . The programming is done for 8-10 seconds. With the device you can also program original keys ordered from the dealer.
   Buy now 600 EUR
Mercedes ML original transponders:
Buy 1 chip 25 EUR
Buy 5 chips for 100 EUR Buy 10 chips for 200 EUR |
|
|
|
|
NEW NEW NEW NEW NEW
The transponder is ready to program direct on the Mercedes C, E and G KLASS models from 1996 to 1999 year for all key positions/number from 1 to 8. This transponder is for the models that use the metal or remote flip key with transponder inside. It is not working on models with electronic plastic key. The only thing you have to do is to insert the key into the ignition and turn it on then the transponder will program itself direct and you can start the car.
Buy now 35 EUR
Mercedes Benz Smart Key Programming Device
  
This programmer is specially made for the programming, reprogramming and repairing of the Mercedes Benz smart keys for the models produced between years 1998 - 2006. In order to program MB smart key, you have to reset the key, take out the Electronic Ignition Switch(EIS), Electronic steering lock(ESL) and the Engine ECU and then program them all together with the help of the special software that comes with the programmer. In order to read the eeprom dumps from the EIS, ESL and Engine ECU you will need the special programmers like OMEGA/ORANGE eeprom programmer and the Motorola/Freescale MC912-9S12-9S12(Xgate) in-circuit Programmer. You will also need the original MB STAR Diagnose tester in order to code the the Engine ECU after resetting it and program the Drive authorization of the car in order to start and run the car.
For customers who wants to visit our company and see how it works, we do a special course for the MB Smart Key Programmer! Send an e-mail for the course price! |
Buy now 5000 EUR |
|
|
