Features:

• Instrument CAN
  - With this function you can establish diagnostic session with the Instrument cluster using KWP2000 over TP2.0
  - You can read current odometer value
  - You can change odometer value
  - Added support for VDO Instrument Cluster 2006+
  - Read/Program memory of instrument cluster immobilizer
  - Reading security access code of the IMMOBILIZER
  - Reading security code (PIN) and component protection via OBDII - VW CRAFTER
  - Read/Write immobilizer related data
• EZS - Kessy (Q7/A6/Allroad)
  - With this function you can prepare dealer key/learn dealer key
  - Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)
• Instrument K-Line
  - With this function you can establish disgnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)
  - You can Read/Change odometer value
  - Read PIN code
  - Read/Write eeprom
  - Read ROM/Flash from the Instrument cluster
  
• Engine Control Unit
  - Read EDC17/MED17 flash memory
  - Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of
  checksums while programming, ME7.1.1, MED9.x, ME7.5)
  - Read/Write flash counters (EDC16)
  - Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
  - Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD)
  - Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)
  - Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
  - Odometer correction (EDC15, EDC16)
• Kessy adaptation
  - This function can be used for adaptation of brand new kessy units to the car. This adaptation can be by CAN TP2.0, K-KWP2000 and also can be used with Porsche Cayenne.
• TV activation ED1/ED2
  - Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF
• Key learning
  - With this function you can learn key/transponder to the vehicle
• Dump tool
  - With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the correcponding unit
• Airbag
  - With this special function you can Read/Write EEPROM memory of the airbag module
  - Clear the crash data of the airbag module
• Custom Read/Write
  - Using this application you can read/program memory in some electronic control unit
• PIN Convertor
• Service interval
  - Using this function you can perform reset of the service reminder, reset of the service interval parameters or change service interval options
• Remote control adaptation
  - Using this application, you can learn remote controls
• Navigation
  - Using this application, you can enable/disable the “Eject” button of the “Navigation” system
• Cruise control system
  - Using this application, you can activate/deactivate a cruise control system and change the related
  steering wheel electronics( SWE) configuration if SWE unit is available
• Brake pads change
  - Using this application, you can “Open rear parking brake for pad change”, “Close rear parking
  brake”, perform “Parking brake function test”